









Weber Alpha Compact
Alpha Compact is a compact automatic label applicator for fast and precise application of pre-printed labels to products and packaging. It can be integrated directly into production lines and used for labelling from the side, top, front, back or bottom.
With a capacity of up to 600 labels per minute, product speeds of up to 70 m/min and a positioning accuracy of ±0.8 mm, Alpha Compact is designed for both high speed and precise labelling. The integrated controller reduces space and installation requirements, while the modular design and range of applicators make the system flexible for different products and production lines.
The system handles labels from 10 × 20 mm to 152 × 300 mm and can be configured via USB or an optional touch display. It can also be expanded with an inkjet printer, among other options, for variable information such as batch numbers, expiry dates and barcodes.
Alpha Compact is designed for fast automatic labelling and can apply up to 600 labels per minute at product speeds of up to 70 m/min. This makes the system well suited to high-flow production lines where labelling must keep pace with production without becoming a limiting factor. Depending on the chosen applicator, the system can work both with products in motion and with labelling at standstill.
With a positioning accuracy of ±0.8 mm, Alpha Compact is designed for precise label placement – even at high cycle rates. The system combines automatic calibration with advanced label detection, so the label is detected and applied with high repeatability. This ensures a consistent result across production, even during continuous operation.
All the control electronics are integrated directly into the Alpha Compact housing, so there is no need for a separate external control unit. This reduces both the space requirement and the amount of cabling and makes the system easier to integrate into existing production lines. An HMI touch display and an I/O interface can also be connected for integration with other production equipment.
Alpha Compact can be configured via USB, where settings such as start/stop functions, single label feed, speed and sensor calibration can be adjusted. Parameters can be saved or loaded via a PC, so previous settings can be reused quickly. This makes the system particularly practical on lines with frequent product or label changeovers, where the set-up needs to be changed quickly.
Alpha Compact can be used for labelling the side, top, front, back or bottom of a product. The modular system can be combined with various applicators for Wipe-On, Tamp-On and Tamp-Blow, among others, so the labelling method can be adapted to the product’s shape, position and movement on the production line. Mechanical, pneumatic and electric applicator solutions are all available.
Alpha Compact can be expanded with an inkjet printer so that variable information can be printed directly during labelling. This could be batch numbers, expiry dates or barcodes added to the pre-printed label during production. In this way, labelling and marking with product-specific information can be combined in a single solution and adapted to different production needs.
Do you need help?
If you would like to hear more about our solutions, please fill out the form and we will contact you as soon as possible.
If you need urgent assistance, you can contact us 24/7/365 on +45 75 60 22 22.
Technical details
| Specifications | Weber Alpha Compact |
|---|---|
| Label placement | Side, top, front, back and bottom |
| Labelling mode | At standstill or in motion* |
| Max. labelling speed | 600 labels/min |
| Positioning accuracy | ±0.8 mm |
| Product speed | Up to 70 m/min |
| Min. label size (W × L) | 10 × 20 mm |
| Max. label size (W × L) | 152 × 300 mm |
| Max. label roll diameter | 300 mm |
| Label roll core diameter | 40 mm (option) |
| Mounting orientation | Any mounting orientation |
| Label unwinding | Passive |
| Liner rewinding | Mechanically coupled |
| Low label warning | Option |
| Label web break detection | Option |
| HMI | Touch display |
| Dimensions (H × W × L) | 617 × 319 × 721 mm |
| Weight | 22 kg** |
| IP rating | IP40 |
| Approval | CE |
| Relative humidity | 20–90%, non-condensing |
| Ambient temperature | 10–38 °C |
| Noise level | 70 dB*** |
| Supply voltage | 90–240 V |
| Mains frequency | 47–63 Hz |
| Current | 2 A |
| Compressed air connection | 6 bar**** |
| Interfaces | USB and I/O interface |
| Optional interface | Ethernet |
* Depends on the chosen applicator.
** Weight depends on the version.
*** A-weighted sound pressure level.
**** Compressed air is relevant as an option with pneumatic applicators.
| Applicator | Function | Drive principle | Stroke / reach | Description |
|---|---|---|---|---|
| Wipe-On, rigid | Wipe-On | Mechanical pendulum | – | Universal, fixed dispensing edge for precise labelling of moving products. |
| Wipe-On, pneumatic | Wipe-On | Pneumatic | Variable | Robust pneumatic dispensing edge with variable extension length. |
| TBM Applicator | Tamp-Blow | Pneumatic | 25–50 mm | Compact linear applicator designed for very high cycle rates. |
| EL Applicator | Tamp-Blow, Tamp-On, Wipe-On | Stepper motor | 250–450 mm | Fully electric linear applicator for fast labelling with several different application principles. |
| KR Applicator | Tamp-On, Tamp-Blow | Pneumatic | 100–400 mm | Compact and precise linear applicator for installations with limited space. |
| HS Applicator | Tamp-Blow, Tamp-On | Pneumatic | 50–100 mm | Compact high-speed linear applicator designed for very short cycle times. |
| ES Applicator | Tamp-Blow | Stepper motor | Rotary arm: 250–400 mm | Compact rotary applicator with electric drive. |
Multicheck offers advice, installation, service and support for labelling and marking solutions from Weber Marking Systems, with a focus on high uptime, stable operation and correct set-up from the start.
We help you choose the right solution, integrate it into your production and packing line, and set up labelling, applicators and printing solutions. We also assist with documentation and ongoing optimisation of the equipment.
Multicheck also offers 24/7/365 service, so support is available whenever production requires it. With technical support, preventive maintenance, spare parts and troubleshooting, we help reduce the risk of downtime and ensure stable operation of your labelling equipment.
