



CEIA THS/FFV21 Series
The CEIA THS/FFV21 Series is a complete free-fall system for metal detection in powders and granulates. The system combines metal detection with automatic rejection and detects magnetic, non-magnetic and stainless metal contamination directly in the product stream.
Multi-Spectrum technology optimises sensitivity while reducing the influence of the product’s own signal. The fast reject valve removes the contaminated product without slowing the product flow, so metal inspection can be integrated directly into production.
The THS/FFV21 Series is made of AISI 316L stainless steel and is available with inlet diameters of 75, 100, 150 or 200 mm. The system is designed with a focus on quick cleaning and maintenance and can be supplied in an ATEX Zone 21 version.
The THS/FFV21 Series uses Multi-Spectrum technology, which analyses the product across a broad spectrum of frequencies. The technology optimises sensitivity to metal contamination while reducing the influence of the product’s own signal.
This makes it possible to maintain high detection sensitivity to magnetic, non-magnetic and stainless metals, even with products where the product effect could otherwise make metal detection difficult.
The THS/FFV21 Series combines a metal detector and an automatic reject valve in one integrated system. When metal contamination is detected, the valve reacts quickly and diverts the contaminated portion of the product away from the normal product stream.
The fast response makes it possible to detect and reject metal contamination without slowing the product flow. Quality control can therefore take place directly within ongoing production with minimal impact on capacity.
AutoTest continuously monitors the metal detector’s function and stability. The system checks the response at the operating frequencies in use and continuously compensates for changes that may arise, for example, from environmental influences or component ageing.
Auto-QC extends the checks with automatic, periodic verification of the calibration. This can reduce the need for manual testing while creating a more consistent and documentable inspection procedure. CEIA highlights benefits of Auto-QC such as reduced manual work, lower risk of accidental product contamination and less product waste.
The THS/FFV21 Series is designed with Fail-Safe functions that support safe operation of both detection and rejection. This means that the system not only has to detect metal, but also helps verify that the inspection process itself is working as intended.
Together with the AutoTest functions, this provides a more controlled process in which changes in the detector’s performance can be identified before they result in reduced detection sensitivity.
The system is made of AISI 316L stainless steel and designed for production environments where cleaning, hygiene and robustness are key requirements. On THS/FFV21-S, the product contact surfaces have a roughness of less than 1 Ra.
The construction is also designed so that the components in contact with the product can be quickly cleaned, dismantled and maintained. This provides easier access to the product contact areas and simplifies routine cleaning and maintenance.
THS Production 4.0 is CEIA’s platform for centralised data collection and management of THS metal detectors. The platform can gather production data and events from multiple metal detectors and enables centralised monitoring, reporting, backup and traceability.
The system supports, among other things, database management and report export as well as integration with higher-level production systems via ERP, OPC-UA and SCADA. This makes it possible to combine information from metal detection with the company’s other quality and production data.
Do you need help?
If you would like to hear more about our solutions, please fill out the form and we will contact you as soon as possible.
If you need urgent assistance, you can contact us 24/7/365 on +45 75 60 22 22.
Technical details
| Specification | THS/FFV21-S | THS/FFV21-CB |
|---|---|---|
| Application | Powder products | Granular products |
| System type | Integrated free-fall system | Integrated free-fall system |
| Detectable metals | Magnetic, non-magnetic and stainless metals | Magnetic, non-magnetic and stainless metals |
| Detection technology | Multi-Spectrum | Metal detection |
| Reject system | Flap reject valve | Cow Bell reject valve |
| Inlet diameters | 75 / 100 / 150 / 200 mm | 75 / 100 / 150 / 200 mm |
| Construction | AISI 316L stainless steel | AISI 316L stainless steel |
| Product contact surfaces | Surface roughness below 1 Ra | Not specified in the brochure |
| Product flow | Detection and rejection without slowing the product flow | Detection and rejection without slowing the product flow |
| AutoTest | Advanced AutoTest | Not specified separately in the brochure |
| Fail-Safe | Yes | Not specified separately in the brochure |
| Cleaning | Product contact parts are designed for quick cleaning and dismantling | Product contact parts are designed for quick cleaning and dismantling |
| ATEX | Zone 21 available on request | Not specified in the brochure |
| Control box | Not specified separately | UL 508A / CSA-C22.2 No. 286 available |
| Special design | Optimised for powder products | Straight product passage through the reject area to prevent product build-up |
Multicheck offers advice, installation, service and support for CEIA metal detectors, with a focus on high uptime, stable operation and correct set-up from the start.
We help you choose the right CEIA solution, integrate it into the production line and set up detection parameters, product settings and reject systems. We also help with documentation and ongoing optimisation of the equipment.
Multicheck also offers 24/7/365 service, so support is available whenever production requires it. With technical support, preventive maintenance, spare parts and troubleshooting, we help reduce the risk of downtime and ensure stable operation of your CEIA metal detector.