Skip to content

Orkla Care

When a checkweigher suddenly broke down at Orkla Care, swift action was crucial to keep production running. With a Wipotec checkweigher in stock and a strong, existing partnership, Multicheck was able to deliver a new solution the day after the enquiry – and have it installed and commissioned the following Monday.

When production came to a standstill, Multicheck delivered in under 24 hours

For companies running production around the clock, even a brief breakdown can have major consequences. Orkla Care experienced exactly that when a checkweigher in its powder production suddenly broke down. With a need to keep production going and avoid a prolonged stoppage, swift action was crucial.

Fortunately, help was close at hand.

A partnership that made the difference

Orkla Care and Multicheck already had an established partnership through the company’s factory in Lynge, where Multicheck had previously supplied a serialisation solution for production. So Orkla Care knew exactly who to contact when the critical situation arose in IshΓΈj.

At that point, the factory was facing a particular challenge. An important powder product had just been relaunched, and the production line was running at high load. A longer production stoppage was therefore not an option.

After Orkla Care got in touch with Multicheck, the options were quickly explored, and fortunately we had a Wipotec HC-M checkweigher in stock that matched the requirements for both capacity and product quality.

From enquiry to delivery in less than a day

On Thursday, the call came in.

On Friday, the new checkweigher was delivered to the factory.

On Monday, one of Multicheck’s technicians was ready to install and commission the solution on the production line.

The fast delivery meant that Orkla Care could quickly re-establish production and avoid prolonged downtime. At the same time, the installation ensured that the new solution was integrated correctly and efficiently into the existing production.

More than just a new checkweigher

For Orkla Care, the project was not only about replacing defective equipment.

The new Wipotec HC-M checkweigher was integrated into the production line as part of an overall optimisation, in which a sensor on the filling machine was also replaced. The combination of the two improvements quickly proved to have a positive effect on production.

What started as an acute challenge turned into an opportunity to improve the overall performance and capacity of the production line.

When service makes the difference

At Multicheck, we know that unforeseen breakdowns can happen, which is why we work purposefully to be able to respond quickly when our customers need help.

“This kind of express delivery is possible because we always strive to keep some extra equipment in stock so that we can help customers in an emergency – even though we do not stock every product. That, combined with a high level of service, is something we find our customers really appreciate,” explains Kristian Johansen, Product Sales Specialist at Multicheck.

A partnership built on trust

For Orkla Care, the fast help and professional handling marked the start of a close partnership with Multicheck.

In addition to the short delivery time, the company highlights the constructive dialogue and technical sparring that have characterised the partnership from the first contact.

“We have had a good and constructive dialogue with Multicheck from the very first contact. Their team has come across as well prepared and professional, and our trust in Multicheck was established right from the start.

We have great confidence in Multicheck and look forward to a long-term partnership in the future,” says Mogens Ingby Knudsen, Project Engineer at Orkla Care.

The positive experience was further confirmed when the new solution not only solved the acute problem but also contributed to more efficient production.

“It is without doubt one of the best decisions we have made,” says Mogens Ingby Knudsen.

The right solution at the right time

The Orkla Care case shows what a difference a fast response, local service and access to the right equipment can make when production is put under pressure.

It is not just about delivering a new machine. It is about understanding the customer’s situation, responding quickly and ensuring that production can continue with as little disruption as possible.

For Orkla Care, the result was not just a new checkweigher, but a solution that strengthened both operational reliability and production capacity.

Can we help you ensure stable and efficient production?

Wipotec HC-A
Wipotec HC-A

Wipotec HC-A is a high-performance checkweigher with electromagnetic force restoration (EMFR) weighing technology, designed for high-speed production. It handles up to 600 products/min., weighing ranges of 750–7,500 g and a standard deviation of just 50 mg, so even small weight deviations can be detected at high production throughput.

See product
Wipotec HC-A-VA
Wipotec HC-A-VA

Wipotec HC-A-VA is a high-performance checkweigher with electromagnetic force restoration (EMFR) weighing technology, up to 400 products/min., weighing ranges of 1,500–7,500 g and a standard deviation from 100 mg. With IP65, it is designed for production with high demands on accuracy and cleaning.

See product
Wipotec HC-A-EX
Wipotec HC-A-EX

Wipotec HC-A-EX is a high-performance checkweigher for ATEX Zone 2 with an electromagnetic force restoration load cell and a capacity of up to 300 products/min. It is designed for precise weight control in potentially explosive production environments.

See product
Wipotec HC-A-MDi
Wipotec HC-A-MDi

Wipotec HC-A-IS is designed for precise weight control of cylindrical and unstable products such as cans, bottles and aerosol cans. It handles up to 100 products/min. with a standard deviation as low as 5 mg, while the dual-lane version HC-A-IS-D reaches up to 180 products/min. For production with strict cleaning requirements, HC-A-IS-WD (Wash Down) is available with IP69K, a weighing range of up to 3,750 g and a capacity of up to 60 products/min.

See product
Wipotec HC-A-IS
Wipotec HC-A-IS

Wipotec HC-A-IS is designed for precise weight control of cylindrical and unstable products such as cans, bottles and aerosol cans. It handles up to 100 products/min. with a standard deviation as low as 5 mg, while the dual-lane version HC-A-IS-D reaches up to 180 products/min. For production with strict cleaning requirements, HC-A-IS-WD (Wash Down) is available with IP69K, a weighing range of up to 3,750 g and a capacity of up to 60 products/min.

See product
Wipotec HC-A-Multitrack
Wipotec HC-A-Multitrack

Wipotec HC-A-Multitrack is a multi-lane checkweigher for simultaneous weight control of small products on up to 14 lanes. Each lane has its own electromagnetic force restoration load cell, so products are weighed individually and can be rejected separately.

See product
Wipotec HC-M / HC-M-WD
Wipotec HC-M / HC-M-WD

The HC-M and HC-M-WD both handle up to 250 products/min with a standard deviation from 100 mg. The HC-M is available with weighing ranges from 750 to 7,500 g, while the HC-M-WD is available with 3,750 and 7,500 g and is the Wash-Down version in AISI 304 stainless steel with IP69K for production with stringent cleaning requirements.

See product
Wipotec HC-M-MDi / HC-M-WD-MDi
Wipotec HC-M-MDi / HC-M-WD-MDi

The Wipotec HC-M-MDi combines checkweighing and metal detection with an electromagnetic force restoration (EMFR) load cell. It handles up to 250 products/min, weighing ranges from 750–3,750 g and a standard deviation from 100 mg. The HC-M-WD-MDi is the Wash-Down version with IP69K, offering the same capacity and precision with weighing ranges of 3,750 or 7,500 g.

See product
Wipotec HC-M-VA
Wipotec HC-M-VA

Wipotec HC-M-VA is an advanced checkweigher with an electromagnetic force restoration (EMFR) load cell, handling up to 250 products/min., weighing ranges from 1,500–7,500 g and a standard deviation from 100 mg.
The model is also available as HC-M-VA-MDi with an integrated CEIA metal detector, combining weight control and metal detection in one solution.

See product
Wipotec HC-M-SL / HC-M-WD-SL
Wipotec HC-M-SL / HC-M-WD-SL

Wipotec HC-M-SL is a heavy-duty checkweigher for large and heavy products with electromagnetic force restoration weighing technology, weighing ranges of 30 or 60 kg and a standard deviation from 500 mg. For intensive cleaning environments, the HC-M-WD-SL with IP69K is available, handling up to 30 kg and 100 products/min. with the same standard deviation from 500 mg.

See product
Wipotec EC-E
Wipotec EC-E

The Wipotec EC-E is a compact checkweigher with an EMFR load cell for precise automatic weight control. It handles up to 150 products/min, is available with weighing ranges up to 6,000 g and offers a standard deviation from 150 mg.

See product
Wipotec EC-E-SL
Wipotec EC-E-SL

The Wipotec EC-E-SL is a heavy-duty checkweigher for larger and heavier products. With its EMFR load cell, it handles up to 35 kg and 100 products/min with a standard deviation from 2 g. With a 500 or 600 mm belt width, it is well suited to automatic weight and completeness checks of items such as cartons and transport packaging.

See product
Wipotec EC-E-VA
Wipotec EC-E-VA

The Wipotec EC-E-VA is a hygienic checkweigher in AISI 304 stainless steel with IP65. Its EMFR load cell ensures precise weight control of up to 150 products/min, with weighing ranges up to 6,000 g and a standard deviation from 150 mg.

See product

Do you need help?

If you would like to hear more about our solutions, please fill out the form and we will contact you as soon as possible.

If you need urgent assistance, you can contact us 24/7/365 on +45 75 60 22 22.

Call +45 75 60 22 22

*
Read our privacy policy